Craft cutters such as Silhouette machines only handle flexible rubber-bonded magnets up to about 1 mm thick; sintered NdFeB, SmCo and hard ferrite require industrial cutting equipment.
Compared with laser (heat demagnetization risk), waterjet (rough edges) and CNC milling (slow), the diamond wire saw delivers the best combination: ±0.02 mm precision, mirror-finish edges and under 5% material waste.
Diamond wire saw cutting is CNC-controlled and coolant-managed below 50 degC, achieving contour accuracy of ±0.02 mm and edge roughness under Ra 0.5 micrometers.
Typical jobs include NdFeB/SmCo magnets for EV motors, ferrite rings for electronics and custom sensor shapes — from prototype to mass production.
Cutting magnet materials requires specialized techniques to maintain their magnetic properties and structural integrity. While craft cutters like Silhouette machines work for some flexible magnets, industrial applications demand advanced solutions like diamond wire saw cutting machines. In this guide, we’ll explore proper cutting methods for different magnet types and introduce Ensoll’s custom cutting services for complex shapes.
On rare-earth blocks, the tighter tolerances described in how to cut neodymium magnets are what separate a clean contour from a chipped one.
2. Professional Cutting Methods for Industrial Applications
Application Lab
Send us your material — get a free test-cut report
Tell us the material, thickness and target tolerance. We cut a sample on our own diamond wire saw and return wire spec, feed rate, surface finish and cycle time.
– Silhouette machines work only for thin flexible magnets
– Industrial magnets require diamond wire saws
– Ensoll provides precision custom cutting for all magnetic materials
Need complex shapes cut? [Get in touch] for a free consultation!
Frequently Asked Questions
Can you cut magnets with a Silhouette or other craft machine?
Only thin, flexible materials: rubber-bonded magnets up to about 1 mm, adhesive-backed magnetic sheets and PVC-based magnetic media. It cannot cut sintered NdFeB, SmCo or hard ferrite magnets, which require industrial processes.
Last reviewed: September 2026
What is the best method for contour cutting magnets?
A CNC diamond wire saw cutting machine. It follows programmed contours at ±0.02 mm precision with coolant-controlled temperatures under 50 degC, producing smooth Ra <0.5 micrometer edges with less than 5% material waste.
Can you laser cut neodymium magnets?
Only thin magnetic sheets, and with caution — laser heat can locally demagnetize the material. For sintered NdFeB blocks and precise contours, diamond wire saw cutting is the safer and more accurate method.
What precision can a diamond wire saw achieve on magnetic materials?
Around ±0.02 mm on contour cuts — roughly ten times tighter than waterjet and far better than craft cutters (±0.5 mm) — with edge quality good enough to skip secondary polishing.
The rapid evolution of 5G telecommunications, electric vehicle (EV) charging infrastructure, and high-frequency power supplies has placed a massive spotlight... read more
Key Takeaways
A single-crystal silicon ingot goes through cropping, diameter grinding, slicing, edge chamfering, lapping and polishing before it is ready... read more
Introduction to KDP Crystals
KDP crystals have a large nonlinear optical coefficient and a high laser damage threshold, making them important... read more