金刚石线环环氧树脂精密切片: 2 毫米 测试数据
Precision slicing test data for 2 mm epoxy resin discs (Ø20 mm) on an ESO-GM gantry ring diamond wire machine with water-based cutting: TTV 0.014–0.023 mm, thickness tolerance ±0.012 mm, Ra 0.58–0.75 μm, max chipping 7.2 微米.
0086 19937798228 [email protected]
Precision slicing test data for 2 mm epoxy resin discs (Ø20 mm) on an ESO-GM gantry ring diamond wire machine with water-based cutting: TTV 0.014–0.023 mm, thickness tolerance ±0.012 mm, Ra 0.58–0.75 μm, max chipping 7.2 微米.
Precision slicing test data for 2 mm magnetic material on an ESO-GM gantry ring diamond wire machine with oil-based cutting: TTV 0.013–0.024 mm, thickness tolerance ±0.0125 mm, Ra 0.48–0.62 μm, max chipping 7.5 微米.
Contour cutting test data for a 10 mm circle in borosilicate glass using a ring diamond wire loop on an ESS200-4T vertical machine: TTV 0.012–0.025 mm, thickness tolerance ±0.014 mm, Ra 0.46–0.66 μm, max chipping 5.4–9.4 μm.
测试数据用于 10 使用环保ESO-GM龙门机上的环形金刚石线环进行毫米级太阳能光伏板切片: TTV 0.006–0.008 mm, thickness tolerance ±0.014 mm, Ra 0.61–0.76 μm, max chipping 5.1–11.1 μm.
抽象: This report documents a precision straight-slicing trial on glass tube supplied by a European customer. The workpiece was a tube of 12 mm outside diameter and 104 mm length, sliced into sections 3 mm long on an ESO-GM diamond wire loop cutting machine, with cutting oil as the cooling medium and a fully coated diamond wire. Across five sections the measured results came out at total thickness variation (TTV) 0.004-0.028 毫米, thickness tolerance ±0.026 mm against a 3.000 mm nominal, surface roughness Ra...
抽象: 本申请报告涵盖了对欧洲客户提供的光学玻璃进行的高精度直切片测试. The workpiece was a rod of 30.5 毫米直径, cut into sections 15 mm long on an ESO-GM gantry diamond wire loop cutting machine, with cutting oil as the cooling medium and a fully coated diamond wire. Measured results across three sections: total thickness variation (TTV) 0.003-0.008 毫米, thickness tolerance ±0.141 mm against a 15.000 mm nominal, surface roughness Ra 0.58-1.06 微米, and maximum edge chipping 4.9-6.2 μm....
抽象: 本应用报告记录了对欧洲客户提供的BG38玻璃板进行的高精度直线切割测试. The workpiece measured 86 mm x 60 mm x 1 mm and was cut into strips of 5 mm x 60 mm x 1 mm on an ESO-GM gantry diamond wire loop cutting machine, using cutting oil as the cooling medium and a fully coated diamond wire. Measured results: total thickness variation (TTV) 0.003-0.020 毫米 (average 0.014 毫米), thickness tolerance ±0.027 mm, surface roughness Ra 0.63-0.76...
抽象: Total thickness variation (TTV) is the single number most often quoted for a precision slicing process, and the easiest one to measure badly. This guide documents the nine-point grid dual-probe method used in Ensoll's slicing tests for PEEK 和 PMI foam cut with a 金刚石线环: how the sample is prepared, how it is held, where the nine points sit, how TTV is calculated from them, and which errors produce a plausible but wrong number. Key TakeawaysTTV = Tmax - Tmin...