Corte de Precisão de Ferro Dúctil com Fio de Diamante em Loop: 10 Dados de Teste em mm
Teste de amostras para um cliente europeu (Company R) · Processo de corte com fio diamante em anel
Visão geral
This report documents precision slicing of ductile iron using a ring diamond wire cutting system. A avaliação abrange a seleção de equipamentos e fios, metodologia de corte, parâmetros do processo, e a uniformidade de espessura resultante, precisão dimensional, surface finish and edge integrity of the sliced parts. Test results indicate that a large-format ring diamond wire machine, resfriamento e lubrificação à base de óleo, e parâmetros de processo devidamente ajustados proporcionam corte estável, high-precision slicing of ductile iron at production-representative section sizes.
1. Amostra de teste
| Parâmetro | Valor |
|---|---|
| Material | Ductile iron (nodular cast iron) |
| Dureza | aprox.. 6–7 Mohs |
| Dimensões da peça de trabalho | 500.0 milímetro (L) × Ø120.0 mm |
| Dimensões alvo do corte | 10.0 milímetro (L) × Ø120.0 mm |
Ductile iron combines relatively high strength with a degree of toughness. Its structure consists of a metal matrix with spheroidal graphite nodules, and the difference in machinability between the matrix and the graphite phase can produce local variation in cutting behaviour along the kerf.
2. Seleção de Equipamento e Fios
Equipamento: ESG400-4T. In view of the characteristics of ductile iron and the requirement to slice at a 10 espessura em mm, Ensoll selected the ESG400-4T ring diamond wire cutting system with a matched cutting feed. The machine maintains a stable wire trajectory and slice dimensional accuracy.
Fluido de arrefecimento: corte a óleo. O óleo de corte é utilizado como meio de arrefecimento e lubrificação. It continuously lubricates and cools the contact zone between the diamond wire and the ductile iron and carries away part of the heat and cutting debris generated during cutting, reducing the effect of friction-heat accumulation and debris build-up on the machining condition. Controlled oil supply helps maintain a stable cutting zone.
Fio: totalmente banhado. Foi selecionado um fio de diamante totalmente banhado, with the diamond abrasive grains bonded to the wire core by electroplating. The plated bond improves grain adhesion and distribution uniformity, so the wire maintains a consistent grinding capability and material removal behaviour during cutting. This reduces grain pull-out and wire wear, which matters for a metal workpiece of this section size.

3. Método de Corte e Vantagens do Equipamento
Configuração de corte em pórtico. A estrutura em pórtico proporciona elevada rigidez geral e estabilidade de funcionamento, which reduces the effect of machine vibration and structural deformation on the wire trajectory and keeps the cut stable. This limits the influence of changes in cutting load on slice position and dimensional accuracy in the ductile iron. A máquina está equipada com um sistema de extração de névoa que remove prontamente a névoa gerada durante o corte.
Controlo inteligente de tensão. O sistema ajusta a tensão do fio de diamante em tempo real, de acordo com as condições de corte, e suporta tanto modos de tensão constante como de tensão variável, mantendo o fio a funcionar de forma estável. O controlo de tensão bem ajustado reduz a flutuação na trajetória do fio e limita o carregamento desigual localizado e o risco de quebra do fio causado pela variação de tensão, reducing the occurrence of slice defects.
Memória de quebra do fio. Se o fio de diamante se partir ou a máquina parar de forma anormal, O sistema regista automaticamente a posição de usinagem atual e o estado de funcionamento associado. Após a substituição do fio, o corte retoma a partir da posição registada, reducing dimensional deviation and material loss from re-positioning and repeat machining. This improves the continuity of ductile iron slicing.
Large workpiece capacity and high-speed cutting. The ESG400-4T provides a large effective working envelope, accommodating ductile iron workpieces of substantial section size. The ring diamond wire runs in continuous circulation, and wire speed can reach three to four times that of conventional wire-cut machines, which raises material removal efficiency while keeping the cut stable.
4. Parâmetros de processo e método de arrefecimento
| Parâmetro | Valor |
|---|---|
| Diâmetro do fio (milímetro) | 0.80 × 2600 |
| Velocidade de travessia do fio (mm/min) | 1.5 |
| Largura de corte (milímetro) | 120 |
| Tensão do fio (N) | 150 |
| Velocidade do fio (M) | 32 |
| Tempo de curvatura do fio (s) | 60 |

5. Desempenho e resultados de corte

5.1 Dados de teste TTV (Unidade: milímetro)
Variação total da espessura (TTV) foi medido usando uma grelha de nove pontos, método de medição de espessura de duas sondas numa etapa de mandril a vácuo. The measurement was applied to ductile iron slices produced by ring diamond wire cutting. Antes da medição, o instrumento foi estabilizado termicamente e calibrado contra um bloco de espessura padrão. A espessura nominal da fatia foi 10.000 milímetro.
| Amostra | Leituras de espessura de nove pontos | Tmáx | Tmín | TTV |
|---|---|---|---|---|
| S01 | 9.994, 9.997, 10.000 9.996, 10.001, 10.004 9.998, 10.005, 10.008 |
10.008 | 9.994 | 0.014 |
| S02 | 9.990, 9.994, 9.998 9.995, 10.000, 10.003 9.997, 10.004, 10.007 |
10.007 | 9.990 | 0.017 |
| S03 | 9.986, 9.991, 9.995 9.993, 9.998, 10.002 9.996, 10.003, 10.009 |
10.009 | 9.986 | 0.023 |
| S04 | 9.995, 9.998, 10.001 9.997, 10.002, 10.005 9.999, 10.006, 10.010 |
10.010 | 9.995 | 0.015 |
| S05 | 9.992, 9.996, 9.999 9.994, 10.000, 10.004 9.998, 10.005, 10.009 |
10.009 | 9.992 | 0.017 |
| S06 | 9.988, 9.993, 9.997 9.994, 9.999, 10.003 9.996, 10.004, 10.008 |
10.008 | 9.988 | 0.020 |
Avaliação. Nine-point grid measurement was applied to six ductile iron slices. Os valores TTV foram 0.014, 0.017, 0.023, 0.015, 0.017 e 0.020 milímetro, abrangendo de 0,014 a 0,023 mm ao longo do lote, com um TTV médio aproximado 0.018 mm em um 10.000 mm de espessura nominal. The results confirm good thickness uniformity when slicing a metal workpiece of this section size.
5.2 Dados de Tolerância à Espessura (Unidade: milímetro)
A tolerância à espessura foi derivada dos dados de espessura de nove pontos, usando 10.000 mm conforme calculada a espessura nominal. A variação de espessura positiva e negativa foi calculada em cada posição de medição e os resultados de todas as seis amostras foram agregados. O desvio máximo positivo, A máxima variação negativa e o intervalo de variação global foram determinados para avaliar a consistência da espessura.
| Amostra | Espessura média | Desvio da espessura |
|---|---|---|
| S01 | 10.000 | 0.000 |
| S02 | 9.999 | −0,001 |
| S03 | 9.997 | −0,003 |
| S04 | 10.001 | +0.001 |
| S05 | 10.000 | 0.000 |
| S06 | 9.998 | −0,002 |
| Máxima deformação positiva | — | +0.010 milímetro |
| Máxima deformação negativa | — | −0,014 mm |
| Banda de tolerância de espessura | — | ±0,012 mm |
Avaliação. Em relação a uma espessura nominal de 10.000 milímetro, the six slices showed mean thicknesses of 9.997–10.001 mm, com a média do lote próxima do nominal. Em todos os pontos de medição, a variação de espessura variou de −0,014 mm até +0.010 milímetro, com um desvio absoluto máximo de 0.014 milímetro.
5.3 Dados de Rugosidade de Superfície Ra (Unidade: μm)
Rugosidade da Superfície (Ra) was measured by stylus profilometry on the ductile iron slices after ring diamond wire cutting. Foram tomadas posições representativas no centro e em ambos os lados ao longo da face final do corte, os dados do perfil da superfície foram obtidos com um profilómetro de stylus, e o parâmetro de rugosidade Ra foi registado em cada posição.
| Amostra | Centro | Meio-esquerda | Meio-direita | Ra média |
|---|---|---|---|---|
| S01 | 1.12 | 1.18 | 1.15 | 1.15 |
| S02 | 1.05 | 1.11 | 1.08 | 1.08 |
| S03 | 1.28 | 1.35 | 1.31 | 1.31 |
| S04 | 0.98 | 1.04 | 1.01 | 1.01 |
| S05 | 1.16 | 1.22 | 1.19 | 1.19 |
| S06 | 1.09 | 1.15 | 1.12 | 1.12 |
Avaliação. A média de Ra nas seis amostras variou entre 1.01 Para 1.31 μm, com todas as medições individuais entre 0.98 e 1.35 μm. The spread across measurement positions on each slice is modest, indicating a consistent surface finish along the cut face on a metal workpiece of this size.
5.4 Edge Condition Data (Unidade: μm)
Edge defects were quantified by optical imaging on a toolmaker’s microscope. As arestas da amostra foram limpas antes da medição e a ampliação e a escala de medição do instrumento foram calibradas. A aresta da fatia foi então inspecionada ao microscópio, identifiable edge defects were located and measured at four points per sample, e o valor máximo foi registado.
| Amostra | Ponto 1 | Ponto 2 | Ponto 3 | Ponto 4 | Max. edge defect |
|---|---|---|---|---|---|
| S01 | 5.2 | 6.1 | 5.7 | 6.5 | 6.5 |
| S02 | 4.8 | 5.5 | 6.0 | 5.2 | 6.0 |
| S03 | 7.1 | 8.3 | 9.2 | 8.0 | 9.2 |
| S04 | 4.3 | 5.0 | 5.6 | 4.8 | 5.6 |
| S05 | 6.0 | 6.8 | 7.4 | 6.5 | 7.4 |
| S06 | 5.4 | 6.2 | 6.8 | 5.9 | 6.8 |
Avaliação. Toolmaker’s microscope inspection of the six ductile iron slices gave maximum edge defect values of 6.5, 6.0, 9.2, 5.6, 7.4 e 6.8 μm, com um valor máximo geral de 9.2 μm. S04 showed the best edge integrity and S03 the largest defect at 9.2 μm.

6. Conclusão
The good results obtained in this high-precision slicing trial of ductile iron stemmed mainly from the combined effect of a purpose-built cutting machine, o método de arrefecimento e lubrificação, e parâmetros de processo corretamente ajustados. Ductile iron has relatively high strength and a degree of toughness, and its structure consists of a metal matrix with spheroidal graphite. During ring diamond wire cutting, the difference between the matrix and the graphite phase can cause local variation in cutting behaviour, which places particular demands on machine rigidity and parameter matching.
Equipamento. An ESG400-4T ring diamond wire cutting system was used. The machine provides a large effective working envelope for larger workpieces and a high-rigidity structure that reduces the effect of vibration and structural deformation on the wire trajectory. The ring diamond wire runs in continuous circulation at speeds well above conventional wire-cut machines, which raises removal efficiency without sacrificing cut stability.
Arrefecimento e lubrificação. Foi utilizado óleo de corte como meio de refrigeração e lubrificação. It continuously lubricates and cools the wire–workpiece contact zone, reduces friction at the cutting interface, and carries away part of the cutting heat and debris, improving conditions in the cutting zone. For a material with the strength and toughness of ductile iron, effective lubrication is essential to consistent surface finish.
Parâmetros do processo. Velocidade do fio, feed rate and other key parameters were matched to the properties of ductile iron and to the 10 mm slice requirement. Coordinating wire speed with workpiece feed keeps material removal steady and avoids localised increases in cutting load from excessive feed, or unstable cutting from mismatched parameters.
Geral. Considerando em conjunto com a precisão dimensional da fatia, rugosidade superficial (Ra) and edge quality, the combination of the ESG400-4T ring diamond wire machine, resfriamento e lubrificação à base de óleo, and appropriately matched cutting parameters achieves a well-matched process for ductile iron. The results support ring diamond wire cutting as a practical route for precision slicing of ductile iron at this section size.